Epoxy floor coating is one of the most popular floor covering systems today. A lot of people prefer to install them, as they have different options when it comes to what type of epoxy paint to install on their residential or commercial property.
The installation of epoxy coating is also pretty straightforward. If you enjoy painting walls, then high are the chances that you’ll be able to install epoxy floors too. Epoxy coatings are much like paint too. The only difference is that they come in a consistency that’s applicable to floors. Floors are more prone to stress and pressure than walls.
What Do You Need to Install Epoxy Floors?
While epoxy floors follow a special application process, it is still very similar to painting. You need to determine beforehand what kind of epoxy coating you’ll buy from the store to get the right thickness that you want. Sometimes, you also need to add several coating to achieve the effect you want.
Choosing the right type of epoxy paint is very important. Check out the area that the kit can cover and decide how much paint you’re going to need. You should also decide whether you have to buy all the tools needed or just rent them out. There’ll be tools that you may really have to buy, such as brush, goggles, roller, rubber gloves, squeegee, plastic water pails, and a few other items.
How to Apply Epoxy Floors
To install epoxy floors at least two workers are needed. The first step is to clean the entire area before you begin to apply the paint using the brush and roller. Epoxy floor installation is classified as an easy project if you’re home improvement savvy and moderate if you’re not so.
On the estimate, the entire project will take you a total of nine hours, but you can’t finish it within the day. You have to allot three days before you’re done, as you’ll need to wait for first coating to dry up before starting with the second one. Depending on the type of paint that you use, you typically need three coatings of epoxy paint on your floor.
What You Should Know
It’s highly recommended that you hire a professional who is well-experienced in installing epoxy floor coating to handle the job. If you do, you’ll see that the installer will first test the moisture content of the concrete prior to installation. If there’s too much moisture present, then epoxy coating can’t be used.
If you’re using the best type of epoxy paint out there, you only need three coatings, which consist of the base coat, the second coating, and the design that you want to put on the surface, which is optional, and then the top coat. There are epoxy paints though, that require up to seven coatings to get the best results.
But before you apply the paint, you have to do some patching on the concrete first. All areas that require repair should be duly repaired so that the epoxy covering will be leveled. In the same way, the concrete should also be prepped and cleaned thoroughly prior to application so the paint will adhere properly to the floor.